| Model | F1 |
| picture |   |
| Body material | Food grade 306 stainless steel+brass shell |
| Scale inhibition | 86% |
| Scale inhibition material | SAAS special multicomponent metal |
| SAAS anti-scale | change the physical properties of the fluid, affect the nucleation crystallization process of scale crystal, and change the shape of scale crystal. Scale is easy to disperse and not easy to adhere |
| SAAS remove scale | decrease the surface tension,increase the permeability it will penetrate between the scale and the container wall.The difference expansion rate between water and metal materials is used to make the original scale gradually soft, crack and fall off, and achieve excellent scale removal performance. |
| Pressure gauge | built in luxury pressure gauge |
| Configuration materal quantity | 5 chips |
| Effective time | 10 years |
| Flow rate | 6T/H |
| Runner design | Double rotary positive recoil large chip |
| Inlet Water Pressure | 0.1-1MPa |
| Wire Connector | M42 thread (standard 3/4" and 1/2" hot melt joints) |
| Installation position | Position of the main entry pipe |
| Power Source | Manual |
| Application scenario | The whole house |
| Price(USD) | |
| 1~500pcs | |
| 500~999pcs | |
| >1000pcs |
| Model | F1 |
| picture | |
| Body material | Food grade 306 stainless steel+brass shell |
| Scale inhibition | 86% |
| Scale inhibition material | SAAS special multicomponent metal |
| SAAS anti-scale | change the physical properties of the fluid, affect the nucleation crystallization process of scale crystal, and change the shape of scale crystal. Scale is easy to disperse and not easy to adhere |
| SAAS remove scale | decrease the surface tension,increase the permeability it will penetrate between the scale and the container wall.The difference expansion rate between water and metal materials is used to make the original scale gradually soft, crack and fall off, and achieve excellent scale removal performance. |
| Pressure gauge | built in luxury pressure gauge |
| Configuration materal quantity | 5 chips |
| Effective time | 10 years |
| Flow rate | 6T/H |
| Runner design | Double rotary positive recoil large chip |
| Inlet Water Pressure | 0.1-1MPa |
| Wire Connector | M42 thread (standard 3/4" and 1/2" hot melt joints) |
| Installation position | Position of the main entry pipe |
| Power Source | Manual |
| Application scenario | The whole house |
| Price(USD) | |
| 1~500pcs | |
| 500~999pcs | |
| >1000pcs |
